LDAP Configuration for Authenticating VPN Users


Aviatrix provides integration with an LDAP/AD server for the authentication of users logging into the VPN services. This guide walks you through the configuration steps.

Configuration Details


This step must be done by an existing Aviatrix Controller admin user.


This configuration before or after a gateway is created. These steps assume it is done after creation.

  1. Log in to your Controller.

  2. Select OpenVPN on the left sidebar.

  3. Select Edit Config.

  4. In the Modify Authentication section, click on the LDAP below the Authentication label.


  5. Enter the values as described in the table below.

  6. Enter a value for LDAP User and click Test LDAP Configuration to test the configuration.

  7. Click Modify to save this configuration.