Bootstrap Configuration Example for FortiGate Firewall in Azure¶
Using the bootstrap option significantly simplifies Fortinet FortiGate initial configuration setup.
In this document, we provide a bootstrap example to set up an “Allow All” firewall policy, firewall health check policy and static routes for the FortiGate to validate that traffic is indeed sent to the FortiGate for VNet-to-VNet traffic inspection.
For a manual setup, follow manual setup example.
There are two ways to configure Fortinet Fortigate via Bootstrap Configuration:
Method 1: Configuring Fortigate Firewall via User Data¶
Follow the Aviatrix Firewall Network (FireNet) workflow to this step to launch the firewall instance.
To Configure FortiGate using Custom Data, go to the Aviatrix Controller > Firewall Network > Setup > Launch & Associate Firewall Instance.
Fill in the required fields. Click Advanced. Fill in the following parameters.
Advanced Field | Example Value |
---|---|
User Data | Bootstrap Configuration |
Sample Fortigate Bootstrap Configuration to configure firewall “Allow-all” policy, health check policy and RFC 1918 static routes is shown below:
# Simple Example Fortigate Bootstrap Configuration # Not Necessary Fulfill the Requirement for any Customer # Login Username and Password config system admin edit admin set password <password> end # System Hostname config system global set hostname myhost set timezone 04 end # Important HTTPS needs to be allowed on LAN interface for Firewall Health Check config system interface edit port2 set allowaccess https next end #RFC 1918 Routes and Subnet Default Gateway config router static edit 1 set dst 10.0.0.0 255.0.0.0 set gateway 10.26.0.81 set device port2 next edit 2 set dst 192.168.0.0 255.255.0.0 set gateway 10.26.0.81 set device port2 next edit 3 set dst 172.16.0.0 255.240.0.0 set gateway 10.26.0.81 set device port2 next # LoadBalancer IP edit 4 set dst 168.63.129.16 255.255.255.255 set gateway 10.26.0.81 set device port2 next end # Firewall Allow All Policy Example config firewall policy edit 1 set name allow_all set srcintf port2 set dstintf port2 set srcaddr all set dstaddr all set action accept set schedule always set service ALL next end
Launch the instance. Wait for 15 minutes for it to boot up and initialize.
Log in to the HTTPS interface of the public IP with username “admin” and the password specified in the example Fortigate Bootstrap Configuration. For initial Fortigate login information, go to Credentials for FortiGate Initial Login. You must be registered to access the Aviatrix Customer Support website. If you are not already registered, you can sign-up at https://support.aviatrix.com.
Method 2: Configure Fortigate Using Azure Blob¶
Creating Storage Account and Private Container¶
Log in to Azure’s console and create a storage account, and private container in the Azure blob for bootstrap with a unique name, for example “bootstrap-fortigate”, using this guide Step 2 and 3 with the following structure:
Storage Account
Container
fortigatebootstrap/
init.txt
license.txt
Uploading Config Files¶
- The example init.conf file contains the “Allow All” setup. To download the file, click
init.txt
. - For the example license.lic file (optional), click
license.txt
. - Upload these two files in the blob. Please follow Step 4 in this guide.
Launching the Fortigate Instance¶
First follow Step 5 to get the SAS URL for Configuration and License.
Follow the Aviatrix Firewall Network (FireNet) workflow to this step.
Fill in the required fields. Click Advanced. Fill in the following parameters.
Advanced Field | Example Value |
---|---|
Bootstrap Storage Name | Azure Storage Name (e.g. transitbootstrapsotrage) |
Container Folder | Private Container Name (e.g. fortigatebootstrap) |
SAS URL Config | SAS Config URL (Follow the given guide) |
SAS URL License | SAS License URL (Follow the given guide) |
Launch the instance. Wait for 15 minutes for it to boot up and initialize. Please make sure to verify the RFC 1918 and Internet static route in Fortigate firewall.
Log in to the HTTPS interface of the public IP with username “admin” and the password specified in the example Fortigate Bootstrap Configuration. For initial Fortigate login information, go to ZENDESK_TITLE. You must be registered to access the Aviatrix Customer Support website. If you are not already registered, you can sign-up at https://support.aviatrix.com.
Ready to Go¶
Now your firewall instance is ready to receive packets.
Next step is to validate your configurations and polices using FlightPath and Diagnostic Tools (ping, traceroute etc.).
Launch one instance in PROD Spoke VNet and DEV Spoke VNet. Start ping packets from a instance in DEV Spoke VNet to the private IP of another instance in PROD Spoke VNet. The ICMP traffic should go through the firewall and be inspected in firewall.