Supported Edge Hardware for the Aviatrix Edge Platform
This document provides a list of the edge hardware supported on the Aviatrix Edge Platform.
Dell Hardware Technical Specifications
Dell PowerEdge R450 Server for Edge Spoke Gateway
Component |
Requirement |
Front Storage |
Chassis with up to 8x2.5" Drives |
Backplace |
SAS/SATA Backplane |
Trusted Platform Module |
Trusted Platform Module 2.0 V3 |
Chassis Configuration |
2.5" Chassis with up to 8 Hard Drives (SAS/SATA) 1 CPU |
Processor |
Intel® Xeon® Gold 5318Y 2.1G, 24C/48T, 11.2GT/s, 36M Cache, Turbo, HT (165W) DDR4-2933 |
Additional Processor |
No Additional Processor |
Processor Thermal Configuration |
Heatsink for 1 CPU configuration (CPU less or equal 165W) |
Memory Configuration Type |
Performance Optimized |
Memory DIMM Type and Speed |
3200MT/s RDIMMs |
Memory Capacity |
32GB RDIMM, 3200MT/s, Dual Rank, 16Gb BASE x8 |
RAID Configuration |
C1, No RAID for HDDs/SSDs (Mixed Drive Types Allowed) |
RAID/Internal Storage Controllers |
Front HBA355i Front Load |
Hard Drives |
480GB SSD SATA Read Intensive 6Gbps 512 2.5in Hot-plug AG Drive, 1 DWPD |
BIOS and Advanced System Configuration Settings |
Power Saving Dell Active Power Controller |
Advanced System Configurations |
No-OS Partition Removed |
Fans |
Standard Fan x5 |
Power Supply |
Dual, Hot-plug, Fully Redundant Power Supply (1+1), 800W, Mixed Mode TM |
Power Cords |
(2) NEMA 5-15P to C13 Wall Plug, 125 Volt, 15 AMP, 10 Feet (3m), Power Cord, North America |
PCIe Riser |
Riser Config 0, 1xOCP 3.0(x16)+ 1x16LP |
Motherboard |
PowerEdge R450 Motherboard with Broadcom 5720 Dual Port 1Gb On-Board LOM |
OCP 3.0 Network Adapters |
Intel E810-XXV Dual Port 10/25GbE SFP28, OCP NIC 3.0 |
Bezel |
LCD Bezel for x8 Chassis |
Optics & Cables for Network Cards |
Select either 25G or 10G. Each server needs two SFPs.
|
Operating System |
No Operating System |
OS Media Kits |
No Media Required |
Embedded Systems Management |
iDRAC9, Enterprise 15G |
Quick Sync |
No Quick Sync |
Password |
iDRAC,Factory Generated Password |
IDRAC Service Module |
iDRAC Service Module (ISM), NOT Installed |
Group Manager |
iDRAC Group Manager, Disabled |
Rack Rails |
ReadyRails A11 drop-in/stab-in Slide Combo Rails Without Cable Management Arm |
Internal Optical Drive |
No Internal Optical Drive |
System Documentation |
No Systems Documentation, No OpenManage DVD Kit |
Shipping |
PowerEdge R450 Shipping |
Shipping Material |
PowerEdge R450 x8 Short Drive Shipping Material |
Regulatory |
PowerEdge 1U CCC and BIS Marking, No CE Marking on Chassis |
Services: Hardware Support |
Basic Next Business Day 36 Months, 36 Month(s) |
Services: Extended Service |
NO WARRANTY UPGRADE SELECTED, 36 Month(s) |
Dell PowerEdge R450 Server for Edge Transit Gateway
| The Dell PowerEdge R450 for Edge Transit Gateway uses two Ethernet controllers. |
Component |
Requirement |
Front Storage |
Chassis with up to 8x2.5" Drives |
Backplane |
SAS/SATA Backplane |
Trusted Platform Module |
Trusted Platform Module 2.0 V3 |
Chassis Configuration |
2.5" Chassis with up to 8 Hard Drives (SAS/SATA) 1 CPU |
Processor |
Intel® Xeon® Gold 5318Y 2.1G, 24C/48T, 11.2GT/s, 36M Cache, Turbo, HT (165W) DDR4-2933 |
Additional Processor |
No Additional Processor |
Processor Thermal Configuration |
Heatsink for 1 CPU configuration (CPU less or equal 165W) |
Memory Configuration Type |
Performance Optimized |
Memory DIMM Type and Speed |
3200MT/s RDIMMs |
Memory Capacity |
32GB RDIMM, 3200MT/s, Dual Rank, 16Gb BASE x8 |
RAID Configuration |
C1, No RAID for HDDs/SSDs (Mixed Drive Types Allowed) |
RAID/Internal Storage Controllers |
Front HBA355i Front Load |
Hard Drives |
480GB SSD SATA Read Intensive 6Gbps 512 2.5in Hot-plug AG Drive, 1 DWPD |
BIOS and Advanced System Configuration Settings |
Power Saving Dell Active Power Controller |
Advanced System Configurations |
No-OS Partition Removed |
Fans |
Standard Fan x5 |
Power Supply |
Dual, Hot-plug, Fully Redundant Power Supply (1+1), 800W, Mixed Mode TM |
Power Cords |
(2) NEMA 5-15P to C13 Wall Plug, 125 Volt, 15 AMP, 10 Feet (3m), Power Cord, North America |
PCIe Riser |
Riser Config 0, 1xOCP 3.0(x16)+ 1x16LP |
Motherboard |
PowerEdge R450 Motherboard with Broadcom 5720 Dual Port 1Gb On-Board LOM |
OCP 3.0 Network Adapters |
Intel E810-XXV Dual Port 10/25GbE SFP28, OCP NIC 3.0 |
Additional Network Cards |
Intel E810-XXV Dual Port 10/25GbE SFP28 Adapter, PCIe Low Profile |
Bezel |
LCD Bezel for x8 Chassis |
Optics & Cables for Network Cards |
Select either 25G or 10G. Each server needs four SFPs.
|
Operating System |
No Operating System |
OS Media Kits |
No Media Required |
Embedded Systems Management |
iDRAC9, Enterprise 15G |
Quick Sync |
No Quick Sync |
Password |
iDRAC,Factory Generated Password |
IDRAC Service Module |
iDRAC Service Module (ISM), NOT Installed |
Group Manager |
iDRAC Group Manager, Disabled |
Rack Rails |
ReadyRails A11 drop-in/stab-in Slide Combo Rails Without Cable Management Arm |
Internal Optical Drive |
No Internal Optical Drive |
System Documentation |
No Systems Documentation, No OpenManage DVD Kit |
Shipping |
PowerEdge R450 Shipping |
Shipping Material |
PowerEdge R450 x8 Short Drive Shipping Material |
Regulatory |
PowerEdge 1U CCC and BIS Marking, No CE Marking on Chassis |
Services: Hardware Support |
Basic Next Business Day 36 Months, 36 Month(s) |
Services: Extended Service |
NO WARRANTY UPGRADE SELECTED, 36 Month(s) |
HP Hardware Technical Specifications
HPE ProLiant DL360 Gen10 1U Server
| Component | Requirement |
|---|---|
Processor |
Intel Xeon Gold 5218 |
Memory |
48GB |
Storage SSD |
960GB SATA MU SFF SC MV |
NIC |
Intel dual port 10/25G |
Ethernet Adapter |
4 port 1G onboard Ethernet controller |
Power Supplies |
Dual 500W power supplies |
Other |
iLO (Integrated Lights-Out) Advanced pack |