Diagnostic Tools
You can run diagnostics for any Aviatrix gateway instance running in your multicloud network:
-
Using Diagnostics > Diagnostics Tools. The available tools are Gateway Diagnostics, Connectivity Diagnostics, and BGP Diagnostics.
-
From Topology Properties: performing diagnostics from Topology can drastically reduce the time spent troubleshooting issues.
Gateway Diagnostics
-
On the Gateway Diagnostics page, select a Gateway Instance.
-
Select a tool from the Gateway Diagnostics list.
-
Click Run.
Gateway Diagnostics | Description |
---|---|
Ping |
Runs pings directly from the gateway to outside the Aviatrix-managed network or to any resource inside the network. |
Packet Capture |
Capture packets on any gateway. Filter on host and port number and specify the capture time. Search and filter by time, source address, destination address, source port, destination port, protocol, flags, length, and info. Select the interface on the physical or virtual interface you want to capture on. Click Start to start the capture, click Stop to stop the capture, then click Download to download the pcap file. The pcap file can be viewed by Wireshark. |
Traceroute |
Run trace route. |
Tracepath |
Discover the MTU on the path if the router supports it. |
Connectivity |
Test the connectivity of the gateway to a specified host running on a specified TCP or UDP port. |
Active Sessions |
View sessions that are active on the selected gateway. You can filter active sessions by search criteria. For example, a search on a specific port to see if the gateway has an action session on that port. |
Interface Stats |
View interface statistics about the gateway. The number of interfaces or tunnels associated with the gateway is displayed. Click on the name of an interface or tunnel to see its statistical information. |
Services |
Check the status of gateway services and restart services. |
Diagnostics |
|
Tracelog |
Upload a gateway’s tracelog directly to Aviatrix Support. The controller and gateway tracelog is uploaded and the support team notified. |
Connectivity Diagnostics
You can only run Connectivity Diagnostics on gateways that have Site2Cloud connections.
-
On the Connectivity Diagnostics page, select a Gateway Instance.
-
Select a Connection.
-
Select a tool from the Gateway Diagnostics list.
-
Click Run.
Connectivity Diagnostics | Description |
---|---|
Logs (you can enable verbose logging if desired) |
View the logs for the selected Gateway Instance and Connection. You can copy this information to the clipboard. |
Security Association Details |
Displays any security associations for the tunnel. |
IPsec Service |
Indicates if the IPsec service is Up. |
Configuration |
Displays the IPsec configuration. |
Security Policy Details |
Displays the Security Policies for the selected Gateway Instance and Connection. |
Analysis |
Provides a tunnel analysis (for example, reachability of the Peer gateway). |
Reset Connection |
Click Reset to reset the connection. |
BGP Diagnostics
-
On the BGP Diagnostics page, select a Gateway Instance.
-
Select BGP Command from the Diagnostics list.
-
Click Run.
Controller Diagnostics
On the Controller Diagnostics page, select a tool from the Tools list.
Controller Diagnostics Tool | Description |
---|---|
Ping |
Run ping from the Controller VM. |
Services |
Run and restart Controller services. |
Command Log |
View Controller command logs. Click Refresh to refresh the latest logs. |
Event Log |
View Controller event logs by event type. |